Login
Main Menu
Job Category
General Jobs
Admin & Business Jobs
GOOD TIPS FOR BETTER ONLINE JOB HUNTING
Info : Avoiding Home Business Failures
It’s been said that 80% of all small business dies within the first 3 years. And the rest are somehow struggling along with meager revenues. Only a handful is successful. Home based business has an even shorter lifespan. Every enthusiastic home based venture starts out with a big promise, a lot of excitement and enthusiasm.
However at the first signs of trouble or a slow take off the people become panicky. Having been accustomed to regular pay check, when the money does not roll in week after week and the bank balance hits the low digits, there is a sense of panic and the exciting home business gets trashed.
My own experience tells me this happens just when you are through with organizing, setting up and the difficult transition period of reaching out to the customers, you decide to wind up the business in favor of a job.
Now here are a few tips to persevere and make a success of your home business.
Plan in advance your finances for running your family for a minimum period of 6 months.
Plan every aspect of your business – right from creating the product to final shipments - on paper. Don’t leave out anything. This is what is called a business plan. Make it elaborate and group each aspect under a heading and subheading.
Home workers need to set a disciplined work schedule. Having no bosses around or compulsions of commuting may make you take things easy and relaxed. At least for the first 6 month work as if you are in employment and put in the required hours. You can relax and cut down on working hours when you start earning enough.
Don’t procrastinate or put things off for tomorrow. Action is one major ingredient for success. If you need to do something do it today. Do it now.
Hot Info!!!
|
WELCOME TO MALAYSIA JOB INFORMATION PORTAL
| Subscribe
Jawatan Kosong Terus ke Email anda |
|
| Subscribe to EjobsMalaysia
|
| Visit
this group |
You will get:
i. Government Jobs Vacancy Update
ii.Government Link Company Jobs Vacancy Update
iii.Private Jobs Vacancy Update
 
Note : If you not receive confirmation email, please check
your SPAM Inbox. TQ
|
|
|
|
Jobs Directory
Top: Business: Electronics_and_Electrical: Components: Semiconductors: Contract_Manufacturing:
See also:
 |
|
» ACI Group - Offers turnkey contract manufacturing, logistics and testing services.
|
 |
|
» AME AS - Custom and standard silicon photodetectors and thick and thin film optoelectronic devices, offering wafer fabrication, bonding and packaging, and testing.
|
 |
|
» Amitec - Provides high density interconnect (HDI) substrates and flip chip semiconductor BGA packaging for single or multichip (MCM) modules. Packaging description, technical notes, and company presentations.
|
 |
|
» ASE Korea, Inc. - Assembly and testing services for sensor, wireless, and automotive semiconductors. Facilities in Asia, Europe, and USA. Site lists capabilities including test equipment used, and package datasheets are available in PDF.
|
 |
|
» DALSA Semiconductor - Open foundry offering specialty wafer fabrication for MEMS, high voltage CMOS, analog and mixed signal CMOS, and CCDs with experience in telecom, telephony, and optical networking chips. Company overview, facilities and manufacturing process descriptions.
|
 |
|
» Dolphin Technology Inc. - Provides a wide range of high performance, high speed silicon-IP. For designers, needing standard or custom IP such as memory, I/O, standard cell libraries, data path modules or analog blocks.
|
 |
|
» First Level Inc. - Manufacturing service specializing in microelectronic packaging needs. Offering contract assembly in ESD protected clean rooms, COB, die attach, wirebonding, component pick and place, MCM, BGA, CSP, and flip chip.
|
 |
|
» Honeywell Electronic Materials - Offers interconnect solutions and IC packaging specializing in on-chip semiconductor interconnects, including spin-on dielectrics and sputtering targets. Product and technology briefs, and a description of company's manufacturing cleanroom.
|
 |
|
» Incide - A fabless design house focused on RF and high-speed digital integrated designs.
|
 |
|
» Jade Precision Engineering Pte Ltd - Singapore-based company providing lead-frame stamping, milling, plating, and taping services for semiconductors. Company history, description of services, and photos of example products.
|
 |
|
» NOVASIC - Providing wafering and polishing services of high performance semiconductors and industrial crystals.
|
 |
|
» PolarFab - Bipolar and BiCMOS wafer manufacturing processes. Bloomington, MN, USA.
|
 |
|
» Premier Semiconductor Services - Back-end services for commercial, aerospace, and military products including semiconductor taping, BGA balling, and baking.
|
 |
|
» Prologue Technology Inc. - Manufacturer representative for semiconductor design and manufacturing. Based in Markham, Ontario, Canada, serving primarily Canada, Central and Eastern US. Close proximity to the Lester B. Pearson Airport in Toronto.
|
 |
|
» Promex Industries Inc. - Microelectronics technologies, specialty chip packaging, design, layout, materials expertise, process engineering for outsourced optoelectronics, microelectronics, chip packaging and manufacturing. From China.
|
 |
|
» Protochips Inc. - Offers custom layout and fabrication services for emerging companies and university groups.
|
 |
|
» Reltech Limited - European supplier of advanced semiconductor burn-in and reliability test systems.
|
 |
|
» Satcon Electronics - Manufacturer standard and custom microelectronic assemblies, thin film substrates, semiconductor packaging and wire bonding. Company overview and list of capabilities.
|
 |
|
» Silicon Infusion Limited - Provides single chip solutions for T1/E1/J1, DTMF, ADPCM, and many other telecommunications standards.
|
 |
|
» 1st Silicon - Semiconductor foundry founded in 1998 by the Malaysian State of Sarawak. 0.18 and 0.25 micron CMOS and mixed signal CMOS IC.
|
 |
|
» Tower Semiconductor LTD. - Independent foundry of semiconductor integrated circuits specializing in embedded nonvolatile memory, CMOS image sensors, and mixed signal devices. 0.35 micron and up. Israel.
|
 |
|
» Trikon Technologies - Semiconductor manufacturer utilizing plasma etch, PVD (physical vapour deposition) and CVD (chemical vapour deposition) equipment.
|
 |
|
» Valtronic - Manufacturers custom miniature modules and packaging, including chip-on-board, flip chip, chip-on-chip, and multichip modules. Include capabilities, and illustrated discussions of packaging technologies and processes.
|
 |
|
» ViASIC - Company offering low NRE one mask architecture and software solutions to the ASIC community. Aimed at FPGA conversion and ASIC replacement markets.
|
 |
|
» WaferTech - Wafer manufacturing, probing, assembly and final test. .25 micron. Fab in Washington State, USA.
|
The content of this directory is based on the Open Directory and may have been modified by DWodp
Powered by DWodp live version 1.2.5
Copyright © 2003-2007 Dominion Web
Job Interview question..
There are several classes of job interview questions:
1.
Skills based questions
These job interview questions are related to specific job skills outlined in
essential criteria. Candidates are asked to give examples of their work, or
outline their duties and performance in key roles.
2.
Knowledge based questions
Many jobs have a required knowledge base. Interview questions are used to find
out the depth of knowledge, and to check and confirm candidates have the essential
information required to do the work involved.
3.
Technical questions
These are a different type of knowledge based job interview questions, and they
relate to the technical issues of the position. In some job interviews, a person
on the interview panel is appointed to ask these questions, and give expert
evaluation of answers to the panel.
4.Problem
solving questions
• The problem solving job interview questions are now standard practice.
Problem solving questions are used to define skill levels and the ability to
deal with difficulties.
• Experience related questions This is a range of job interview questions
designed to test prior experience across the range of job skills contained in
the position. They include additional questions to clarify the scope of candidates?
experience. They also deal with issues related to the job, particularly where
levels of experience relate directly to the complexity of the work.
5.Interpersonal
skills questions
These are job interview questions which explore workplace relationships, team
roles, leadership, and other personal characteristics of candidates. Questions
can range from dealing with stress to contributing to a team.
6.Assessing
job interview questions
Interview assessments use the merit principle to decide successful applicants
based on their answers to the job interview questions. A panel discussion and
consensus, or a formal evaluation process using an 'evaluation grid', (a step
by step analysis of answers) is conducted.
7.The
selection process
Interviewers select the candidate who meets all job criteria to an acceptable
standard. The panel then makes a recommendation for appointment to management.
|
|
Join our FB
Hot!! Training Seminar
Resume Writing
More Jobs ...
IT Jobs
Job Interview Tips....
Practice
• Practice answering interview questions and practice your responses to
the typical job interview questions and answers most employers ask. Think of
actual examples you can use to describe your skills. Providing evidence of your
successes is a great way to promote your candidacy.
Prepare
• Prepare a response so you are ready for the question "What do you
know about our company. Know the interviewer's name and use it during the job
interview. If you're not sure of the name, call and ask prior to the interview.
Try to relate what you know about the company when answering questions.
Watch
• Take a look at my Job Interview Tips Videos, so you'll be sure to dazzle
a potential employer and leave the right impression.
Get
Ready
• Make sure your interview attire is neat, tidy and appropriate for the
type of firm you are interviewing with. Bring a nice portfolio with copies of
your resume. Include a pen and paper for note taking.
Be
On Time
• Be on time for the interview. On time means five to ten minutes early.
If need be, take some time to drive to the office ahead of time so you know
exactly where you are going and how long it will take to get there.
Stay
Calm
• During the job interview try to relax and stay as calm possible. Take
a moment to regroup. Maintain eye contact with the interviewer. Listen to the
entire question before you answer and pay attention - you will be embarrassed
if you forget the question!
Show
What You Know
• Try to relate what you know about the company when answering questions.
When discussing your career accomplishments match them to what the company is
looking for.
Follow
Up
• Always follow-up with a thank you note reiterating your interest in
the position. If you interview with multiple people send each one a thank you
note.
More Job Links..
|
